5000VA 48V / με ενσωματομένο φορτιστή μπαταριών 0-100A
Τιμή χωρίς ΦΠΑ
The Conergy Xtender offers in a single device all the functions
of a pure sine wave inverter, a highly efficient battery
charger, a powerful transfer system and intelligent boosting
of external power sources. Its outstanding capabilities set
new benchmarks and provide unmatched freedom of use.
The Conergy Xtender is the perfect solution for complex
hybrid off-grid systems. It is able to accommodate all types
of energy sources, such as photovoltaic modules, small wind
turbines, diesel gensets or the public power grid, regardless of
whether it works as a single- or three-phase generator.
The Conergy Xtender offers maximum flexibility with regard to
the AC output, as output powers from 2.5 kVA to 21 kVA (singlephase)
and from 7.5 kVA to 63 kVA (three-phase) can be achieved
with only one product type. This simplifies the planning and
system design of off-grid systems significantly and allows the
system to be ideally adapted to specific energy requirements
Model Conergy Conergy Conergy Conergy
Xtender 3000-12 Xtender 5000-24 Xtender 6000-48 Xtender 8000-48
Inverter
Rated battery voltage 12 V 24 V 48 V 48 V
Input voltage range 9.5–17 V 19–34 V 38–68 V 38–68 V
Continuous power @ 25 °C 2,500 VA 4,500 VA 5,000 VA 7,000 VA
Smart boost power 3,000 VA 5,000 VA 6,000 VA 8,000 VA
30 minute load @ 25 °C 3,000 VA 5,000 VA 6,000 VA 8,000 VA
5 second load @ 25 °C 3 × Pcont
Maximum load Up to short-circuit
Maximum asymmetrical load Up to Pnom
Load detection (standby) 2 to 25 W
Admissible cos phi 0.1–1
Maximum efficiency 93 % 94 % 96 % 96 %
Open-circuit power OFF/standby/ON 1.7 W /2.2 W / 14 W 1.8 W / 2.5 W / 20 W 2.2W / 3 W / 22 W 2.2 W / 3.8 W / 34 W
Output voltage Sine wave 230 VAC (+ 0/-10 %) adjustable to 190–245 VAC
Output frequency 50 Hz adjustable 45–65 Hz ± 0.05 % (quartz-controlled)
Harmonic distortion < 2 %
Overcharge and short-circuit Automatic disconnection then 3 startup attempts
Overheating protection Alarm prior to disconnection and automatic restart
Battery charger
6-phase battery charger Programmable I-U-Uo-equalisation-Uo(low)-U(periodic)
Adjustable charge current 0–160 A 0–140 A 0–100 A 0–120 A
Input current sharing system 1–50 A
Maximum input voltage 265 VAC
AC input voltage range Level of detection adjustable from 150 to 230 VAC
Admissible input frequency 45–65 Hz
Battery control (factory value / adjustable range with RCC-02)
Absorption voltage 14.4 V / 9.5–18 V 28.8 V / 19–36 V 57.6 V / 38–72 V 57.6 V / 38–72 V
Floating voltage 13.6 V / 9.5–18 V 27.2 V / 19–36 V 54.4 V / 38–72 V 54.4 V / 38–72 V
Equalisation voltage – / 9.5–18 V – / 19–36 V – / 38–72 V – / 38–72 V
Low voltage disconnection 10.8 V / 9.5–18 V 21.6 V / 19–36 V 43.2 V / 38–72 V 43.2V / 38–72 V
Temperature compensation –5 / 0 to –8 mV / °C/cell (optional BTC-01)
General data
Auxiliary contacts 2 independent contacts 16 A – 250 VAC (potential-free 3 points)
Maximum transfer relay current 50 A
Maximum transfer time 15 ms
Weight 34 kg 40 kg 42 kg 46 kg
Dimensions: H × W × D mm 220 × 290 × 500 220 × 290 × 500 220 × 290 × 500 220 × 310 × 500
Protection type IP23
Conformity EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022, EN 61000-3-2, Dir. 89 / 336/EEC, LVD 73 / 23/EEC
Operating temperature range –20 to +55 °C
Ventilation Forced from 55 °C
Noise level < 10 dB / < 35 dB (without / with ventilation)
Warranty 2 years
